An ideal fun model for evening flying, at shows; fly ins, BBQ night muck about and also the Langar Mini Fly-In in September! Put a smile on your face and put some fun back into your flying.

Kits are now available. (NRCS members only)

Kit comes with full-size plan, all Depron parts cut ready to glue together, carbon spar for wing and fuselage, and laser-cut motor mount.
Kit cost is £8. (NRCS members only)

Specifications:

30” wingspan

24” length

12 oz flying weight

4 channel

Fully aerobatic and bloody fast!
For Kits and Plans phone or email steve_woodhead@yahoo.co.uk

Tel 07973 404516

Extra items needed to complete:
1 tube Uhu POR
1 600mm length 2mm carbon spar
Horns, clevises, links, 5 min epoxy.
1 length 18 gauge piano wire, pair of 2” plastic wheels.
Paint: Tamiya PS- polycarbonate range.
2” wide waterproof tape, Velcro strap for radio gear.

ALL ITEMS ABOVE AVAILABLE FROM HOBBYSTORES BEESTON

Radio equipment and motor combo.
We have used BRC Hobbies for all the gear on the original Gee Bees.
The kit was designed around the cheapest budget gear available and still has great performance!

IF YOU WISH TO USE YOUR GEE BEE IN THE CONTEST AT THE LANGAR MINI FLY_IN IN SEPTEMBER, YOU MUST USE THE MOTOR BATTERY COMBO AS BELOW!

BRC184 TOWERPRO 2408-21T                 £12.00
BRC190 LiPo BATTERY 13003s 11.1 volt £13.99

Any 9gram servo will do, but we used BRC 689 9grm Hi Torque Servos (3 required) £3.99 each.

Any receiver will do but if you want a micro full range Rx you won’t do better than BRC 318 Corona 6ch micro Rx £12.99 (micro crystal required!)

The free 8”x 4” prop supplied with the motor combo is a bit draining on the LiPo, so we are using GWS 7”x 3.5 Hyperdrive propeller, still plenty of power but more forgiving on the battery.

Below are some photos of our Gee Bees so you can see how the links and radio gear are positioned and hooked up.

Any problems or queries, email Steve Woodhead or Steve Green on
steve_woodhead@yahoo.co.uk
ksgreen@proweb.co.uk